Radium Removal

Proven Radium Removal for Municipal Groundwater Systems

ATEC engineers treatment systems to remove naturally occurring radium-226 and radium-228 from groundwater. Our solutions combine proven adsorption, co-precipitation and ion exchange technologies with site-specific treatment design.

When Naturally Occurring Radium Requires Treatment

Radium occurs naturally in some groundwater aquifers.

Radium-226 and radium-228 can dissolve into groundwater as water interacts with naturally occurring uranium- and thorium-bearing formations. For affected utilities, treatment must reliably reduce combined radium concentrations while accounting for the other constituents already present in the source water.

In the United States, the EPA maximum contaminant level for combined radium-226 and radium-228 is 5 pCi/L.

Radium treatment is rarely just a matter of selecting a filter. Water chemistry, iron and manganese concentrations, oxidation conditions, media selection, backwash requirements and residuals disposal can all influence the treatment strategy.

ATEC’s Approach to Radium Treatment

Condition. Capture. Remove.

ATEC evaluates the complete groundwater chemistry to determine the most effective radium treatment approach. Depending on the application, radium may be removed through adsorption onto manganese dioxide media, co-precipitation with iron and manganese, or selective cation exchange.

01. Condition

Optimize water chemistry to support effective radium removal.

02. Capture

Remove radium through adsorption, co-precipitation or ion exchange.

03. Manage

Address backwash residuals and spent treatment media.

Radium Removal Through Pressure Filtration

One common ATEC configuration uses oxidation and manganese dioxide filtration to remove radium while simultaneously treating iron and manganese. Chemical conditioning promotes adsorption and co-precipitation before water passes through the pressure filter vessels.

Proven Removal Mechanism

Manganese dioxide media supports radium adsorption and co-precipitation.

Multi-Contaminant Treatment

Address radium alongside iron and manganese where water chemistry permits.

Automated Operation

Integrated controls support consistent filtration, backwash and chemical conditioning.

Site-Specific Design

Treatment processes and media are selected around groundwater chemistry and operating needs.

ATEC Groundwater Installations

Why Choose ATEC?

With more than four decades of groundwater treatment experience, ATEC brings proven engineering expertise and a broad installed base to municipal water treatment projects.


From new installations to upgrades of existing facilities, ATEC works with utilities, consultants and regional representatives to develop solutions around local water chemistry and operating requirements.

Need to Remove Radium From a Groundwater Source?

ATEC can evaluate your water chemistry, treatment objectives and site requirements to develop a radium treatment approach specific to your application.